universal input ac-dc medical & ite application open frame internal switching power supplies 50watts green power single output tpicm50g series features: ? compact 4?x2? pcb format ? free air convection ? no load power consumption <0.3w ? meet medical standards iec60601-1 & ite standards iec60950-1 ? emi meet cispr en55022 class b ? ce marking compliance output specification output voltage: see ratings chart. output current: see ratings chart. output connector: v-m connector. output wattage: 20-50 watts. line regulation: typical 0.1%. load regulation: typical 1.5%. noise & ripple: typical 1.0% peak to peak. ovp: built-in at vo1(latch). adjustability: not available. overload protection (olp): fully protected against output s overload and short circuit. typ. olp set at 125-150% of rating output power. consult the factory for olp setting. specification input specification input voltage: range typ. 90-264vac. rating 100 to 240vac. input connector: v-m connector. input frequency: 47-63hz. inrush current: 10a rms at cold start 230vac. input current: typ. 0.7a at 115vac, 0.4a at 230vac. dielectric withstand: meet iec 60950-1 & iec60601-1. emi: meet cispr en55022 class b (please refer to note 4). hold-up time: typ. 16ms at 115vac, 90.ms at 230vac. earth leakage: less than 0.2ma at 230vac. no load power: less than 0.3watt. general specification efficiency: typ. 83-90% (various with the output voltage) switching frequency: 65k hz. circuit topology: fixed frequency flyback circuit. transient response: output voltage returns in less than 1ms following a 25% load change. safety standard: iec 60950-1 & iec60601-1 class i. operating temperature: -20 to +50 c at full load without forced air flow. storage temperature: -25 to +85c. cooling: free air convection. construction: 4?x2?x1.01? pcb format. power density: 6.2 watts / cubic inch. note: (1) all measurements are at nominal input, full load, and +25c unless otherwise specified. (2) load regulation is measured at 115vac or 230vac in percentage to indicate the change in output voltage as the load varied f rom half load to full load ( ? %). (3) due to requests in market and advances in technology, specifications subject to change without notice. (4) radiated emi can pass class b with external t core input and output added. in application total power international, inc. total power in ternational, inc. toll free: 877-646-0900(us) ph#978-45 3-7272 www. to tal-power.com
output voltage / current ratings chart mechani cal dimensions: mm [inches] weight: 141g (4.79 oz.) single output main vo1 model no. mi n. t y p. vo lt. max. tpicm50 g-s033600 0.0a 6.00a 3.3v 6.00a tpicm50 g-s050600 0.0a 6.00a 5.0v 6.00a tpicm50 g-s120416 0.0a 4.16a 12.0v 4.16a tpicm50 g-s150340 0.0a 3.40a 15.0v 3.40a tpicm50 g-s240210 0.0a 2.10a 24.0v 2.10a tpicm50 g-s360140 0.0a 1.40a 36.0v 1.40a tpicm50 g-s480105 0.0a 1.05a 48.0v 1.05a input & output connectors pin assignment ac inp ut single output assignment ac-l ac-n ac-g vo 1 dc co m cntr/pin# p1-3 p1-1 g p2 -3,4 p2 -1,2 mating connector: p1,2 molex # 5195 or 5239 series. total power international, inc. total power international, inc. toll free: 877-646-0900(us) ph#978-453-7272 www.total-power.com
|
